Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 3400 High Performance
Versatile small cranes with optimised power-to-weight ratio for lightweight commercial vehicles
- High outreach with up to four hydraulic extensions
- Optimised dead weight
- Small overall width for use in inner city areas
- High value retention thanks to coating technology
Max. lifting moment | 3.1 |
Max. lifting capacity | 990 |
Max. hydraulic outreach | 9.7 |
Slewing angle | 370° |
Slewing torque | 0.4 |
Stabilizer spread (std) | 3.3 m |
Fitting space required (std) | 0.53 |
Width folded | 1.90 |
Max. operating pressure | 250 |
Pump capacity | 15 l/min |
Dead weight (std.) | 447 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Std | 3.1 mt | 4.9 m | 370 | 0.4 | 25.0 Mpa | 15 | 447 kg | 1650 mm | 1900 mm | 530 mm | 4759.76 mm | - | 640 kg |
A | 3.0 mt | 6.5 m | 370 | 0.4 | 25.0 Mpa | 15 | 495 kg | 1650 mm | 1900 mm | 530 mm | 6366.15 mm | 990 kg | 440 kg |
B | 2.8 mt | 8.1 m | 370 | 0.4 | 25.0 Mpa | 15 | 540 kg | 1650 mm | 1915 mm | 530 mm | 7972.54 mm | 990 kg | 320 kg |
C | 2.7 mt | 9.8 m | 370 | 0.4 | 25.0 Mpa | 15 | 580 kg | 1650 mm | 2000 mm | 530 mm | 9578.93 mm | 990 kg | 230 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.